Archivio dell'autore: Federico Carandini

Nova-2seat-11-300x200

Nova two-seater

Nova is family of light-weight textile chairs and armchairs with a precious look and a fully removable fabric cover. A fully textile look combined with physical and visual lightness and the possibility to remove the cover – through four zippers located under the seat – are the characteristics of an absolutely unique and original product. The Nova sofa is a perfect two-seater for smaller spaces: when combined with the armchair and pouf of the same line it creates a full and yet contained living room set.

Metal tube structure, elastic support belts, internal cushions in polyurethane, dacron lining, fabric or leather cover.

Design Federico Carandini, 2017

Medven-two-11-300x200

Medven two-seater

Medven 2-seater is made of multiple steel frames that are individually upholstered with fabric or leather and then assembled.
The deliberately abundant cover and the soft internal filling give the armchair an informal and inviting character. Medven features four casters for increased mobility and versatility of use.

Steel structure, elastic support straps, polyurethane cushions, dacron lining, fabric or leather cover.

Design Alberto Colzani, 2017

gotham sofa 1

Gotham two-seater

La geometria lineare e la leggerezza visiva del sofà Gotham nascono dal telaio metallico, una struttura semplice ed essenziale che supporta il cuscini della seduta e dello schienale. Questi al contrario sono abbondanti e voluminosi e creano un contrasto visivo fra la base di supporto e gli elementi imbottiti, fra necessità strutturale e comodità di seduta. Il sofà Gotham è una perfetta seduta a due posti per spazi più piccoli. Combinandolo con la poltrona e il pouf della stessa linea si ottiene un set da soggiorno completo ma estremamente contenuto.

Struttura in acciaio verniciato colore foglia di the, cuscini in poliuretano rivestiti in tessuto o pelle. Su richiesta la struttura metallica può essere verniciata in altri colori.

Design Federico Carandini, 2015

little big bubble 1

Little Big Bubble

Un poltroncina che attraverso un attento lavoro sulle proporzioni, sulle imbottiture e sul trattamento delle superfici combina un’immagine pulita con un comfort eccezionale. Nuova ma dall’immagine usata, è a somma del fascino del vissuto e delle prestazioni del nuovo. Nell’estetica della seduta avere le mollezze e le abbondanze di un oggetto che ha perso la sfrontata turgidità del nuovo è un segno di eleganza e di durata dell’immagine.

Fusto in massello di pioppo e multistrato di pioppo e betulla, supporto interno con cinghie, imbottitura interna in poliuretano e dacron accoppiato al materiale di rivestimento, imbottitura dei cuscini di seduta in piuma, rivestimento in pelle o tessuto.

Design Alberto Colzani, 2016

Medven 1

Medven armchair

Medven is a textile armchair made of multiple steel frames that are individually upholstered and then assembled. The deliberately abundant cover and the soft internal filling give the armchair an informal and inviting character. Medven features four casters for increased mobility and versatility of use.

Steel structure, elastic support straps, polyurethane cushions, Dacron lining, fabric or leather cover.

Design Alberto Colzani, 2013

New Outline 1

New Outline

New Outline was developed by maximizing the integration of form and function while using minimum material. The steel rod frames define a contour that is slender and light, becoming armrests and backrest as a simple and fluid line. The fully removable seat pan and backrest are made of rich cow-hide. Hidden elastic belts allow them to flex with the weight of the body without stretching thus preventing them from losing their shape and structural property. Familiarity and innovation avilable in 30 colours.

Cow hide seat and backrest, internal elastic straps, cadet gray painted steel structure. Other colours available upon request.

Design Alberto Colzani, 2017

Aluchair 2

Aluchair

Aluchair features.the form of the archetypal wooden chair but it is made of solid metal: the body is created by mechanically joining two cleverly folded sheets of alluminium. No welding is involved in the manufacturing process and the surface is powder-coated. Four small alluminium cylinders complete the legs and house the rubber feet, making the chair extremely quiet despite its full alluminium body. Aluchair is simple and light and yet precious and comfortable.

Alluminium body, rubber feet. Available in RAL grey blue 5008, traffic red 3020, pale green or polished alluminium finish.

Design Alberto Colzani, 2017

Nua 1

Nua

Nua is extremely light, comfortable, visually striking and stackable. The metal structure was developed using the principle of the trestle where each welded steel-rod segment contributes to the overall rigidity and equilibrium of the assembly. Comfort is provided by two cushions held in place by the geometry of the structure without the need for any type of fastening element. Nua champions a philosophy of economy of material where the visual expression of a physical principle translates directly into the form of the final product.

Structure made of painted steel rod in black, red or white. Polyurethane-filled cushions with fabric or leather covers.

Design Alberto Colzani, 2007

Bic 1

Bic

Bic chair is made by a single metal assembly that supports the upholstered seat and holds the legs and the backrest. The use of different materials in the parts of the chair allowes us to take full advantage of their structural properties and their surface qualities: the tactile richness of solid wood for the backrest, the softness of ecoleather and foam for the seat, the rigidity of metal in the supporting structure and the durability of the unpainted natural finish in the solid-wood legs.

Painted steel structure, solid wood legs and backrest, ecoleather upholstered seat with elastic support belts and polyurethane cushion. Available in black or white with legs in natural wood.

wood cover

Wood table

A family of 4-legged tables made of MDF covered with blue stained eucalyptus veneer. Through a simple trick the table, which is in fact the assembly of five parts, appears sculpted from a solid block. The four lateral elements, once they are assembled with the top, become structural withoutthe need for additional parts that would in turn compromise the sculptural effect of the piece.. The table top is 70 cm wide, like a classic fratina, the ancient long dining table of monasteries. This choice of proportions privileges length over width, thus slendering the table and increasing the proximity and the initimacy of diners.

MDF, blue eucalyptus veneer. Other veneers are available upon request

Design Alberto Colzani, 2018

roll cover

Roll table

Roll è il tavolo a pianta centrale di Epònimo. La base, scavata da un unico blocco di marmo, è una forma scultorea, geometrica e allo stesso tempo organica; a seconda del punto di vista il suo profilo cambia in modo drastico. Funzionalmente supporta un piano di cristallo extrachiaro che mantiene un perfetto equilibrio visivo con il volume di marmo sottostante senza intralciarne la visione. Con il nostro piano standard il tavolo Roll accoglie comodamente otto persone.

Marmo New Saint e piano in cristallo temperato extrachiaro da 15 mm. Altre pietre sono disponibili su richiesta.

Design Federico Carandini, 2016

rock-3-960x547

Rock low table

A 4-legged low table completely made of stone. Through a simple trick the table, which is in fact the assembly of five parts, appears sculpted from a solid block. The four lateral elements, once they are assembled with the top, become structural without the need for additional parts that would in turn compromise the sculptural effect of the piece. The surface of the table is treated with a slightly three-dimensional weathered finish that further increases the preciousness and uniqueness of the natural material and that in time hides potential scratches and stains.

White Carrara, black New Saint Laurent or Cipollino marble. Weathered finish. Other stones and finishes are available upon request.

Design Alberto Colzani, 2015

wood low table cover

Wood low table

A family of 4-legged tables made of MDF covered with blue stained eucalyptus veneer. Through a simple trick the table, which is in fact the assembly of five parts, appears sculpted from a solid block. The four lateral elements, once they are assembled with the top, become structural without the need for additional parts that would in turn compromise the sculptural effect of the piece.. The table top is 70 cm wide, like a classic fratina, the ancient long dining table of monasteries. This choice of proportions privileges length over width, thus slendering the table and increasing the proximity and the initimacy of diners.

MDF, blue eucalyptus veneer. Other veneers are available upon request

Design Alberto Colzani, 2018

MT low table cover

MT low table

Our MT coffee table is at once simple and rich. The base is made with a very thin squared metal tubing which results in physically and visually light and clean geometric structure. The oval top is thick solid marble made visually lighter by a bevelled edge. Available in 2 heights.

Grey cadet painted steel structure with marble top in New Saint Laurent, Carrara or Cipollino marble. Other stones are available upon request.

Design Federico Carandini, 2018

nadi low table cover

Nadi ST low table

Nadi re-interprets the structure of an antique table, rich but extremely light, through an aesthetic gesture that enhances the age and at the same time the modernity of the piece. The coffee table version features a sunken top upholstered in blue cotton velvet that contains and protects objects like an oversized box. An original concept created for commercial contexts and now carried into the home.

Solid black-stained mahogany structure with sunken top upholstered in blue cotton velvet. Other colours are available upon request.

Design Federico Carandini, 2018

Gotham MT 1

MT side table

The MT sidetable/nightstand is simple and rich at the same time. The base is made with a very thin squared metal tubing which results in physically and visually light and clean geometric structure. The circular top is thick solid marble made visually lighter by a bevelled edge. Available in 2 heights.

Grey cadet painted steel structure with marble top in New Saint Laurent, Carrara or Cipollino marble. Other stones are available upon request.

Design Federico Carandini, 2017

wood-side-table-cover1

Wood side table

A family of 4-legged tables made of MDF covered with blue stained eucalyptus veneer. Through a simple trick the table, which is in fact the assembly of five parts, appears sculpted from a solid block. The four lateral elements, once they are assembled with the top, become structural withoutthe need for additional parts that would in turn compromise the sculptural effect of the piece.. The table top is 70 cm wide, like a classic fratina, the ancient long dining table of monasteries. This choice of proportions privileges length over width, thus slendering the table and increasing the proximity and the initimacy of diners.

MDF, blue eucalyptus veneer. Other veneers are available upon request

Design Alberto Colzani, 2018

Roll side table

Il tavolino Roll è ottenuto utilizzando il materiale di risulta della produzione del tavolo omonimo: perottenere la finestra passante della grande base cilindrica carotiamo il blocco di marmo ottenendo due cilindri identici; con questi produciamo altrettanti tavolini Roll. Sono infatti copie ridotte in scala del tavolo da pranzo: il piano in vetro è rimpiazzato da un semplice bordino di contenimento scavato nel marmo e leggermente rialzato che permette al tavolino di assolvere alla sua funzione con sicurezza.

Marmo New Saint Laurent. Altre pietre sono disponibili su richiesta.

Design Federico Carandini, 2016

gotham small bench cover

Gotham small bench

A small bench, simple, compact and extremely light, designed to be placed at the end of the bed but versatile enough to go anywhere. The base is made with a very thin squared metal tubing which results in physically and visually light and clean geometric structure. The seating surface is upholstered with shaped polyurethane foam and cotton velvet, minimal but comfortable, colourful and pleasant to touch.

Grey cadet painted steel structure with upholstered top in cotton velvet.

Design Federico Carandini, 2018

gotham wardrobe cover

Gotham wardrobe

Il guardaroba Gotham combina le funzioni di un appendiabiti con quelle di un set di ripiani. È adatto sia per la casa che per uno spazio commerciale, per esporre capi di abbigliamento appesi e piegati. La struttura è estremamente essenziale e leggera: può essere facilmente spostata senza sforzo. I ripiani sono foderati in velluto di cotone: una superficie ricca, piacevole al tatto e che protegge oggetti fragili o delicati.

Struttura in acciaio verniciato colore foglia di the con piani rivestiti in velluto di cotone blu. Su richiesta il piano può essere rivestito con altri materiali e in altri colori e la struttura può essere verniciata in altri colori.

Design Federico Carandini, 2015