Author Archives: Federico Carandini

Nova-2seat-11-300x200

Nova two-seater

Nova is family of light-weight textile chairs and armchairs with a precious look and a fully removable fabric cover. A fully textile look combined with physical and visual lightness and the possibility to remove the cover – through four zippers located under the seat – are the characteristics of an absolutely unique and original product. The Nova sofa is a perfect two-seater for smaller spaces: when combined with the armchair and pouf of the same line it creates a full and yet contained living room set.

Metal tube structure, elastic support belts, internal cushions in polyurethane, dacron lining, fabric or leather cover.

Design Federico Carandini, 2017

Medven-two-11-300x200

Medven two-seater

Medven 2-seater is made of multiple steel frames that are individually upholstered with fabric or leather and then assembled.
The deliberately abundant cover and the soft internal filling give the armchair an informal and inviting character. Medven features four casters for increased mobility and versatility of use.

Steel structure, elastic support straps, polyurethane cushions, dacron lining, fabric or leather cover.

Design Alberto Colzani, 2017

gotham sofa 1

Gotham two-seater

The distinctive linear geometry and the visual lightness of the Gotham two-seater come from its metal frame, a clean aerial structure that holds the seat and backrest cushions. These in contrast are generous and voluminous thus creating a visual juxtaposition between the supporting base and the upholstered elements, between structural need and seating comfort. The Gotham sofa is a perfect two-seater for smaller spaces. Combined with the armchair and pouf of the same line it creates a full and yet contained living room set.

Grey cadet painted structure, polyurethane cushions with fabric or leather covers. The steel structure can be painted in other colours upon request.

Design Federico Carandini, 2015

little big bubble 1

Little Big Bubble

A small armchair that integrates an excellent level of comfort and a clean look through the careful study of proportions, filling materials and surface treatment. It is a mint product that combines the flair of something lived-in with the appeal of modern performance. The soft surfaces and the extra flesh of an armchair that has lost its shameless turgidity are the sign of a lasting and mature elegance.

Solid poplar, poplar plywood and birch plywood internal frame. Elastic support straps, polyurethane core, dacron lining coupled with cover material, leather or fabric cover, down-filled seat cushion.

Design Alberto Colzani, 2016

Medven 1

Medven armchair

Medven is a textile armchair made of multiple steel frames that are individually upholstered and then assembled. The deliberately abundant cover and the soft internal filling give the armchair an informal and inviting character. Medven features four casters for increased mobility and versatility of use.

Steel structure, elastic support straps, polyurethane cushions, Dacron lining, fabric or leather cover.

Design Alberto Colzani, 2013

New Outline 1

New Outline

New Outline was developed by maximizing the integration of form and function while using minimum material. The steel rod frames define a contour that is slender and light, becoming armrests and backrest as a simple and fluid line. The fully removable seat pan and backrest are made of rich cow-hide. Hidden elastic belts allow them to flex with the weight of the body without stretching thus preventing them from losing their shape and structural property. Familiarity and innovation avilable in 30 colours.

Cow hide seat and backrest, internal elastic straps, cadet gray painted steel structure. Other colours available upon request.

Design Alberto Colzani, 2017

Aluchair 2

Aluchair

Aluchair features.the form of the archetypal wooden chair but it is made of solid metal: the body is created by mechanically joining two cleverly folded sheets of alluminium. No welding is involved in the manufacturing process and the surface is powder-coated. Four small alluminium cylinders complete the legs and house the rubber feet, making the chair extremely quiet despite its full alluminium body. Aluchair is simple and light and yet precious and comfortable.

Alluminium body, rubber feet. Available in RAL grey blue 5008, traffic red 3020, pale green or polished alluminium finish.

Design Alberto Colzani, 2017

Nua 1

Nua

Nua is extremely light, comfortable, visually striking and stackable. The metal structure was developed using the principle of the trestle where each welded steel-rod segment contributes to the overall rigidity and equilibrium of the assembly. Comfort is provided by two cushions held in place by the geometry of the structure without the need for any type of fastening element. Nua champions a philosophy of economy of material where the visual expression of a physical principle translates directly into the form of the final product.

Structure made of painted steel rod in black, red or white. Polyurethane-filled cushions with fabric or leather covers.

Design Alberto Colzani, 2007

Bic 1

Bic

Стул Bic сделан из единственного центрального металлического элемента, который поддерживает мягкое сиденье и к которому крепятся ножки и спинка из массива дерева. Использование различных материалов для различный составляющих частей стула позволяет подчеркивать качество отдельных материй и их структурный свойства: теплота дерева спинки стула, мягкость кожи сиденья, твердость металлического каркаса и элегантность деревянных точеных ножек. Выбор дизайна этого стула позволяет нам использовать спинки, сиденье и ножки различных типов и материалов, предлагая таким образом высокий уровень индивидуальности компоновки данной модели, сохраняя при этом уникальную систему сборки.
Структура из окрашенной стали, ножки и спинка из массива ясеня, наполнение сиденья из полиуретана и поддержка ремнями, обивка сиденья из Ecopelle.

Design Alberto Colzani, 2014

wood cover

Wood table

A family of 4-legged tables made of MDF covered with blue stained eucalyptus veneer. Through a simple trick the table, which is in fact the assembly of five parts, appears sculpted from a solid block. The four lateral elements, once they are assembled with the top, become structural withoutthe need for additional parts that would in turn compromise the sculptural effect of the piece.. The table top is 70 cm wide, like a classic fratina, the ancient long dining table of monasteries. This choice of proportions privileges length over width, thus slendering the table and increasing the proximity and the initimacy of diners.

MDF, blue eucalyptus veneer. Other veneers are available upon request

Design Alberto Colzani, 2018

roll cover

Roll table

Roll is Epònimo’s central stem dining table. The base, carved from a single block of marble, is a geometric and yet organic sculpture that changes dramatically when viewed from different angles. Functionally it supports a thick but clear glass top which maintains a perfect visual balance with the marble volume below without hindering the view of it. With our standard glass top our Roll table seats 8 people.

New Saint Laurent marble and 15 mm extra-clear tempered glass. Other stones are available upon request.

Design Federico Carandini, 2016

rock-3-960x547

Rock low table

A 4-legged low table completely made of stone. Through a simple trick the table, which is in fact the assembly of five parts, appears sculpted from a solid block. The four lateral elements, once they are assembled with the top, become structural without the need for additional parts that would in turn compromise the sculptural effect of the piece. The surface of the table is treated with a slightly three-dimensional weathered finish that further increases the preciousness and uniqueness of the natural material and that in time hides potential scratches and stains.

White Carrara, black New Saint Laurent or Cipollino marble. Weathered finish. Other stones and finishes are available upon request.

Design Alberto Colzani, 2015

wood low table cover

Wood low table

A family of 4-legged tables made of MDF covered with blue stained eucalyptus veneer. Through a simple trick the table, which is in fact the assembly of five parts, appears sculpted from a solid block. The four lateral elements, once they are assembled with the top, become structural without the need for additional parts that would in turn compromise the sculptural effect of the piece.. The table top is 70 cm wide, like a classic fratina, the ancient long dining table of monasteries. This choice of proportions privileges length over width, thus slendering the table and increasing the proximity and the initimacy of diners.

MDF, blue eucalyptus veneer. Other veneers are available upon request

Design Alberto Colzani, 2018

MT low table cover

MT low table

Our MT coffee table is at once simple and rich. The base is made with a very thin squared metal tubing which results in physically and visually light and clean geometric structure. The oval top is thick solid marble made visually lighter by a bevelled edge. Available in 2 heights.

Grey cadet painted steel structure with marble top in New Saint Laurent, Carrara or Cipollino marble. Other stones are available upon request.

Design Federico Carandini, 2018

nadi low table cover

Nadi ST low table

Nadi re-interprets the structure of an antique table, rich but extremely light, through an aesthetic gesture that enhances the age and at the same time the modernity of the piece. The coffee table version features a sunken top upholstered in blue cotton velvet that contains and protects objects like an oversized box. An original concept created for commercial contexts and now carried into the home.

Solid black-stained mahogany structure with sunken top upholstered in blue cotton velvet. Other colours are available upon request.

Design Federico Carandini, 2018

Gotham MT 1

MT side table

The MT sidetable/nightstand is simple and rich at the same time. The base is made with a very thin squared metal tubing which results in physically and visually light and clean geometric structure. The circular top is thick solid marble made visually lighter by a bevelled edge. Available in 2 heights.

Grey cadet painted steel structure with marble top in New Saint Laurent, Carrara or Cipollino marble. Other stones are available upon request.

Design Federico Carandini, 2017

wood-side-table-cover1

Wood side table

A family of 4-legged tables made of MDF covered with blue stained eucalyptus veneer. Through a simple trick the table, which is in fact the assembly of five parts, appears sculpted from a solid block. The four lateral elements, once they are assembled with the top, become structural withoutthe need for additional parts that would in turn compromise the sculptural effect of the piece.. The table top is 70 cm wide, like a classic fratina, the ancient long dining table of monasteries. This choice of proportions privileges length over width, thus slendering the table and increasing the proximity and the initimacy of diners.

MDF, blue eucalyptus veneer. Other veneers are available upon request

Design Alberto Colzani, 2018

roll side table cover

Roll side table

Our Roll side table is obtained from the “waste” material that is generated in the manufacturing process of our larger dining table: when we produce it we core out the base by extracting two identical cylinders: with these we produce as many Roll side tables. They are in fact identical scaled-down copies of the dining table but instead of supporting a glass-top they feature a carved lip on the top surface to safely prevent objects from falling or sliding off.

New Saint Laurent marble. Other stones are available upon request.

Design Federico Carandini, 2016

gotham small bench cover

Gotham small bench

A small bench, simple, compact and extremely light, designed to be placed at the end of the bed but versatile enough to go anywhere. The base is made with a very thin squared metal tubing which results in physically and visually light and clean geometric structure. The seating surface is upholstered with shaped polyurethane foam and cotton velvet, minimal but comfortable, colourful and pleasant to touch.

Grey cadet painted steel structure with upholstered top in cotton velvet.

Design Federico Carandini, 2018

gotham wardrobe cover

Gotham wardrobe

The Gotham wardrobe merges the functions of a coat hanger and those of a set of shelves. It can be used in the home or in a commercial space to display hanging as well as folded garments. The structure is physically and visually extremely light; it can be moved with no effort. The shelves are upholstered in velvet to create a luxurious surface that is pleasing to the touch and gentler toward fragile and delicate items.

Grey cadet painted steel structure with shelves upholstered in blue cotton velvet. Other fabrics and colours available. The steel structure can be painted in other colours upon request.

Design Federico Carandini, 2015